|
RXT™ SabreDrive D350: 2U for Disk and Tape
The RXT SabreDrive D350 gives you enormous flexibility in 2U of rack space. The SabreDrive D350 supports up to three drives — three SabreDrives or some combination of tape drives and SabreDrives. With the SabreDrive D350, you can add terabytes of RAID to your data center, with no strategy changes or extra hardware or software. It’s as simple as adding a tape drive. And like tape, SabreMedia packs can be taken off-site. The SabreDrive D350 lets you easily add the performance of disk, the mobility of tape, and the reliability of RAID. If you need more capacity, add SabreMedia packs in the same way you add tape cartridges, and to increase performance, add SabreDrives. The data is backed up to disk, with your choice of RAID level—RAID 0, 1, 1+0, and 5.
RXT SabreDrive D350s are one of the RXT Sabre™ family of products, adding a new level of protection to your overall strategy.
Instant D2D2T
RXT SabreDrive D350 includes one RXT SabreDrive, along with housing for two additional drives. Optionally, choose any of the following to supplement the included RXT SabreDrive:
Two 5.25-inch tape drives, such as LTO and SAIT
Two more SabreDrives
One tape drive and another SabreDrive
One tape drive or a SabreDrive now, then add a third drive—disk or tape—when you need it
Any of these choices lets you easily and efficiently add more disk and tape.
The RXT SabreDrive D350 is:
Easy to install, use, and manage
Ideal for a wide range of backup requirements
Compact and light
Easy to Install, Use and Manage
Manage each SabreDrive in the RXT SabreDrive D350 using a graphical interface displayed through a Web browser. The Web interface leads you through installation, and it’s as easy to use as a few clicks and pressing a button. The front panel also helps you use and manage the drives.
Ideal for a Wide Range of Backup Requirements
Organizations with rack-mount environments looking for an easily integrated D2D2T solution
Organizations backing up databases using a streamlined, all-in-one solution
Small to medium organizations needing instant D2D2T solutions
Data-intensive smaller sites requiring backup to both tape and disk
Adding disk to existing tape environments
Organizations considering a virtual tape library (VTL) but wanting more flexibility
Backing up to disk, then to a tape library
Organizations requiring up to terabytes of disk-based storage
Small Space for Disk and Tape: Specifications
Form Factor: Standard rack-mount 2U / 3.5 inches
Weight: SabreDrive D350: 40 lbs; with one pack: 49 lb.
Connectivity: SCSI, Fibre Channel, Ethernet/iSCSI
Compatibility: All major data protection ISV applications and all major operating systems
Input Voltage: 90-265 VAC input, 47-63 Hz (auto-sensing)
Power consumption: 55 watts per SabreDrive plus 40 watts or less per tape drive
Reliability: 100,000 media insertion and removal cycles
Max data transfer rate (uncompressed): 240MB/sec
Media Options: RXT SabreMedia Gold, Silver, Green; LTO SAIT
Maintenance: Spin up media after 1 year off-line/archival storage
RXT SabreMedia Maximum Raw Capacity: 2 TB*
* Subject to change without notice as higher capacity drives become available
Back to Spectra
|
|
